The recommended storage life of the resin filter kit is approximately two years.
The recommended replacement interval for the filter is approximately six months.
Please note the following:
- Turn off the fan power before replacing the filter.
- The operating temperature range is -10°C to +60°C (non-condensing).
- The filter deteriorates over time.
The degree of deterioration varies depending on the operating environment. - For long-term storage, store the filter at a temperature between 10°C and 30°C
and a humidity between 20% and 65%. - As the filter becomes dirty, cooling performance decreases. If clogging or
deterioration is observed, replace the filter. When replacing the filter, use a
SANYO DENKI replacement filter. - Do not wash the filter with water.
- Avoid storing the filter in locations with high temperature or high humidity,
exposed to ultraviolet light or direct sunlight, or where corrosive gases are present.
Filter replacement example
The replacement filter can be installed by removing the front cover of the resin filter kit
without removing any screws.
